PHOENIX Laminated Glass is a kind of safety glass produced with a film or multilayer films that are bonded together between ordinary glass sheets and then pressed together. It is made by good quality adhesive interlayer and advanced bond technology. This makes the complete adhesion of the vinyl and the glass in the event of breakage the glass fragments remain bonded to the plastic interlayer. Laminated glass contains annealed laminated glass and tempered laminated glass. Different colors and thicknesses of the monolithic glass and the PVB interlayer film will give different performance of the laminated glass.
PHOENIX Laminated Glass provides many solutions for the protection of people. Once broken, the glass will remain bonded to the pvb sheet and is less likely to cause injury to people or property. The PVB sheet also makes penetration more difficult
(1) Safety: Since the two sheets of laminated glass are heated by the PVB glue as the interlayer, the two pieces of glass are firmly adhered to meet the requirements of the safety glass.
After the glass is broken, the PVB film in the laminated glass will firmly stick the broken glass piece to the PVB. On the top, the glass will not fall of course, it will not hurt people. The mostimportant thing is that the impactor will not penetrate the glass
(2) Sound insulation: PVB interlayer is an effective absorber of sound. The film has a damping effect on the sound waves, it can effectively inhibit the spread of noise, especially for buildings near airports, railway stations, downtown and side of roads, after the installation, the sound insulation effect is very obvious.
(3) Anti-UV: The interlayer filters out ultraviolet rays and prevents the furniture and curtains from fading effect. The film can absorb more than 99% of ultraviolet rays, thereby it can protectthe indoor furniture, plastic products, textiles, carpets, works of art, antiquities or other stuff from color fading and aging caused by ultraviolet radiation.
(4) Energy-saving: The film can effectively reduce the solar light transmittance and glass lamination using dark color. Low transmittance film has better performance at energy-saving than regular film of the same thickness.
Phoenix laminated Glass is widely used in areas where a safety glass is needed.
Laminated glass is mainly used for windshields and bulletproof glass for automobiles and airplanes as well as for building windows and doors with special safety requirements such as partition walls, skylights for industrial plants and some underwater projects. Therefore, such safety glass is supposed to be used in the lobby glass, awning, skylight and atrium ceiling too.
China GB157633-ccc. Europe EN14449-CE
PVB Color: Clear. Green. Blue, Bronze. Grey. Milk White. etc.
Glass Color: Clear. Extra Clear. French Green. Dark Green. Ford Blue. Dark Blue. Bronze, Euro
Grey. etc. available with Reflective Glass also
Annealed Float Laminated Glass:
5+0.76+5mm. 6+0.76+6mm, etc.
Sizes: 1830'2440mm, 2140'3300mm, 2250'3300mm etc
Tempered Laminated Glass:
Thickness: Based on project requirement
Max Size. 12000mm ‘3300mm
Min. Size: 100mm*300mm
Tempered Glass is a kind of prestressed glass. Through physical or chemical methods, uniform compressive stress is formed on the surface of the glass and tensile stress is formed inside. It is the presence of such steel stress that can effectively organize the microcrack propagation on the glass surface, so that the tempered glass has high mechanical strength good thermal stability and safety performance.
PHOENIX Bending Glass, also called curved glass, is processed into a softening point by a specific mold and equipment and is rapidly and uniformly cooled by cold air. The tempered glass forms a uniform compressive stress on the surface and the internal tensile stress is formed, which effectively improves the glass. The glass has four times the bending and impact resistance of the glass. When it is broken, it splits into small particles that are uniform and have no splitting mouth and are not easy to injure.
PHOENIX Insulated Glass, also known as double glazing glass, has excellent performance on reduction of heat gain or loss, which made of two or more pieces of Low-E Glass, or clear/tinted/reflective glass with effective support and evenly spaced and sealed at the periphery to form a dry gas space between the glass interlayers. The space between the glasses is field with air or argon and sealed with sealants and aluminum spacers to meet the requirements for saving energy and environmental protection. The glass layer is supposed to be tempered or laminated to ensure safety.